Progress Update

All hardware design discussions

Moderators: seaton, strogg

Progress Update

Postby seaton » Wed Nov 28, 2007 2:05 am

Just to let everyone know that while the forums postings have slowed things have not stopped. I've been posting development progress as I go on my blog - http://blog.everythingrobotics.com/

Currently writing a library for the RFM12 module and will have that in SVN shortly. About 60-70% complete.


Stephen...
seaton
Site Admin
 
Posts: 134
Joined: Mon Jan 23, 2006 8:48 am
Location: Bunbury, Western Australia

One step closer

Postby seaton » Thu Dec 27, 2007 9:01 am

Just finished two prototype boards and will be testing them shortly, I've also written the basic firmware which should put one in master and the other in slave and hopefully I'll get a remote trigger happening. Sorry about the quality of the photos as I only had my phone with me :(

http://blog.everythingrobotics.com/2007/12/27/strobit-triggr-prototype-finished/
seaton
Site Admin
 
Posts: 134
Joined: Mon Jan 23, 2006 8:48 am
Location: Bunbury, Western Australia

Postby strogg » Mon Jan 14, 2008 1:35 am

Do you have anything like a schematic posted somewhere? I was hoping to start working with some of your ideas and seeing what I can put together.

edit: Nevermind, I found your SVN repo. I grabbed copies of the two PIC circuits you did up.
strogg
 
Posts: 19
Joined: Thu Sep 20, 2007 8:31 pm

Postby seaton » Mon Jan 14, 2008 6:08 am

strogg wrote:Do you have anything like a schematic posted somewhere? I was hoping to start working with some of your ideas and seeing what I can put together.

edit: Nevermind, I found your SVN repo. I grabbed copies of the two PIC circuits you did up.


I've put everything up on a page of my blog, firmware is being updated pretty regularly during my testing. My firmware is currently not in SVN only the test routines etc, will be posting shortly.

http://blog.everythingrobotics.com/strobit/

Stephen....
seaton
Site Admin
 
Posts: 134
Joined: Mon Jan 23, 2006 8:48 am
Location: Bunbury, Western Australia


Return to Hardware

Who is online

Users browsing this forum: No registered users and 1 guest

cron