Timing Requirements

Initial requirements discussion

Moderator: seaton

Timing Requirements

Postby crantastic » Sun Sep 23, 2007 4:29 pm

This is an older page I dug up. I'm sure the timings are still valid for a flash burst.

http://www.chem.helsinki.fi/~toomas/pho ... gular.html

In a studio setting, close quarters indoors I set my shutter to 1/60 so this is the window in which the flash has to complete it's burst. Typically most cameras are limited to a 1/250 flash sync. Some can go to 1/500 and some (like my D70s) have synced at 1/2500.

Absolute minimum requirements are that the trigger sets off the flashes within 1/250-sec.
Posts: 1
Joined: Sun Sep 23, 2007 4:09 pm


Postby Thonord » Sun Sep 23, 2007 10:09 pm

In lieu of a project seceretary, we need to put stuff like this in a library.

Ppl who agree need normally not reply, those who disagree or have questions do.
Or - just ignore me.
Posts: 50
Joined: Fri Sep 21, 2007 2:32 pm
Location: Norway

Postby JonSenior » Mon Sep 24, 2007 5:28 am

Perhaps a link / resources page on the Wiki.
Posts: 60
Joined: Fri Sep 21, 2007 7:27 pm
Location: Paris, France

Postby seaton » Mon Sep 24, 2007 8:15 am

I agree with JonSenior use the wiki as a repository
Site Admin
Posts: 134
Joined: Mon Jan 23, 2006 8:48 am
Location: Bunbury, Western Australia

Return to Requirements

Who is online

Users browsing this forum: No registered users and 1 guest